Sunday, 22 January 2017

Honda CBR 125 R Cylinder honing glaze busting



Always a good idea to hone you barrel before refitting and it helps bed in new pistons quicker.





Honda CBR 125 R Cylinder honing glaze busting

Honda CBR 125 R Cylinder honing glaze busting



if your putting in a new set of rings or a new piston , you must hone the cylinder to break the glaze. This will put a nice crosshatch pattern in the cylinder walls. The crosshatch pattern will hold oil and help lubricate the piston and rings as the rings wear in to the cylinder.


To Hone a CBR 125 cylinder is easy . Just stick the hone in the cylinder, add some oil and Move the hone back and forth in the cylinder to produce a cross hatch pattern and in a minute or so your done.


Honda CBR 125 R Cylinder honing glaze busting


look after your stones , the biggest problems i see with this job is using old tired abused stones.

do not use your honer on Nikosil'ed barrels as it will damage your stones and will need replacing .


Honda CBR 125 R Cylinder honing glaze busting


you can buy honing tool on Ebay UK here

or Amazon UK here .










Honda CBR 125 R Cylinder honing glaze busting




No comments:

Post a comment